2 ethrnet port and 8 fiber sfp port switch gigabit optical fiber ethernet switch for ip camera
Model No.: HR-SWG0082F
2 ethrnet port and 8 fiber sfp port switch gigabit Optical Fiber ethernet switch for ip camera
This series of access layer Gigabit Fiber switch, with 8*1000M SFP optical port + 2 adaptive Gigabit Ethernet ports, the same network can be 10Mbps, 100Mbps or 1000Mbps network equipment perfectly integrated together.
Automatically adapt to full-duplex or half-duplex mode, can achieve up to 2000Mbps per port bidirectional transmission rate, 8 Gigabit SFP optical port to achieve long-distance fiber optic network transmission.
MAC address self-learning function, to ensure that the data error-free transmission. Store and forward exchange mode, to prevent the spread of damaged packets in the network.
Flow control function, can prevent a large number of instantaneous data on the impact of the network, support Auto-MDI / MDIX automatic flip function.
High-capacity, high-bandwidth, all ports across the line without blocking the work, support for long frame transmission; for Internet cafes, hotels, intelligent community, small and medium enterprises, high-definition network video surveillance and other use of network intelligence and security provides a low cost, Reliable solution.
The front panel LED of the switch can dynamically display the connection and running status of the device, providing a simple fault detection method for easy maintenance and management.
1. 1.Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, 802.3X, 802.3z
2.Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
5.All ports support wire speed switch, jumbo frame transmission.
6.Rj45 is self-adaption 10/100/1000M port
7.Support MAC address automatic study function, MAC address table gathered reach 8K
8.Configurable: single fiber/ double fiber/ single mode/multimode
Working Temperature: -20℃~55℃
Storage temperature: -40℃~75℃
Working Humidity :10%~90% RH non-condensing
Storage Humidity:5%~90% RH non-condensing
DC 5V 2A
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
Ethernet 10Mbps half-duplex, 20Mbps full-duplex
Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex
Gigabit Ethernet 2000Mbps full-duplex
10Base-T: Cat.3 and above UTP/STP(≤150m)
100Base-TX: Cat.5 and above UTP/STP(≤150m)
1000Base-T: Cat.5 and above UTP/STP(≤150m)
1000Base-LX:62.5μm/50μm MM(2m~550m) or 10μm SMF(2m~5000m)
Act: Lit when TP connection is good
SFPn: Lit when the SFP port is connection good ,or when it’s on transmit
PWR: Lit when power supply is connect
Product Size: 225mm*105mm*32mm(L*W*H)
package Size: 300mm*175mm*100mm(L*W*H)